30Oz Skinny Tumbler For Sublimation **buy In** Cup
30Oz Skinny Tumbler For Sublimation **buy In** Cup

30oz Skinny Tumbler for Sublimation

Regular price $10.50

Stainless Steel include straw and lid.

The Skinny Steel is a 30 oz double wall 18/8 stainless steel thermal bottle with a powder-coated finish that protects against chips and scratches. Copper vacuum insulation keeps drinks cold 24 hr, hot 12 hr. Comes with a clear push-on lid and matching straw. Non-toxic and BPA-free

Mug heat press settings:
- temperature - 380 degrees F
- dwell time - 1 - 1:15 minutes
- pressure - light to medium

- If the image of the final product appears light increase the pressure or
the dwell time slightly (10-15 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (10-15 seconds).
- Too much pressure can cause trapped moisture in the paper to "jet" away
pulling ink with it in a spiked-peaked formation. To avoid this reduce the
- Take care when applying pressure as too much press can cause the tumbler to
bend slightly which will prevent the lid from fitting properly.


Note: Because not all ovens are created equally the dwell time in an oven can
range from 6 to 9 minutes. Convection oven is recommended.Settings will vary
depending on the oven brand and model ink and paper and atmospheric

2nd Note: Be sure that the artwork does not go beyond the size limits of the

people are currently looking at this product

Guaranteed Safe Checkout